Product Details:
Minimum Order Quantity | 1000 Piece |
Valve Size | In/Out/Exhaust - 1/4" BSP |
Media | Air |
Material | Aluminium |
Brand | Uflow |
Pressure | 10 bar |
Flow Rate | 1200 lpm |
AC Voltage | 230V |
DC Voltage | 24V |
Power Consumption | 11W |
Product Details:
Brand | Uflow |
Material | Stainless Steel |
Valve Size | 1-1/2" BSP |
Pressure | 20 Bar |
Model Name/Number | PCN38 |
Type Of Coil Protection | IP-67 Flame Proof Coil (CIMFR Approved) |
Media | Water |
Refer below technical data sheet (Available BSP / NPT)
End Connection:Screwed / Flange
Body Material:SS ASTM A351 Grade CF8 / CF8M
Media Temp & seal o ring:Nitrile (NBR) | EPDM | Viton (FKM) |
-30° C to 90° C | -10° C to 140° C | -10° C to 180° C |
-10° C to 70° C
Media:Air, Water, Chemical, Gas
Main Features:Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment
Operating Voltage & Power Consumption:24AC | 110AC | 230AC | 12DC | 24DC |
7W | 8W | 8W | 10W | 11W |
90% Power saver series also available, Manual Override.
Coil InformationCoil Features:High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require.
Note:Use of filter in the inlet port is recommended.
Product Details:
Brand | Uflow |
Model Name/Number | PCN28 |
Pipe Size | 1/2" |
Min. Operating Pressure | 0.5 Kg/cm2 |
Seal and Diaphragm Material | NBR/EPDM/Viton Flow Factor: 3.2 Kvm3/hr |
Flow Factor | 3.2 Km3/hr |
Body Material Grade | CF8/CF8M |
Orifice | 17 mm |
Max. Operating Pressure | 12 Kg/cm2 |
Refer below technical data sheet (Available BSP / NPT)
End Connection:Screwed / Flange
Body Material:SS ASTM A351 Grade CF8 / CF8M
Media Temp & seal o ring:Nitrile (NBR) | EPDM | Viton (FKM) |
-30° C to 90° C | -10° C to 140° C | -10° C to 180° C |
-10° C to 70° C
Media:Air, Water, Chemical, Gas
Main Features:Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment
Operating Voltage & Power Consumption:24AC | 110AC | 230AC | 12DC | 24DC |
7W | 8W | 8W | 10W | 11W |
90% Power saver series also available, Manual Override.
Coil InformationCoil Features:High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require.
Note:Use of filter in the inlet port is recommended.
Product Details:
Model Name/Number | PCE2GZ-FLP |
Brand | Uflow |
Material | Stainless Steel |
Pressure | 12 Bar |
Port Size | 1/2" NPT |
Diaphragm | Pilot Operated Diaphragm Type |
Voltage | AC 230V |
Media | Water |
Product Details:
Valve Size | 1/2" BSP |
Pressure | 20 Bar |
Brand | Uflow |
Model Name/Number | PCNA6 |
Material | Stainless Steel |
Type Of Coil Protection | IP-67 |
Media | Air |
Refer below technical data sheet (Available BSP / NPT)
End Connection:Screwed / Flange
Body Material:SS ASTM A351 Grade CF8 / CF8M
Media Temp & seal o ring:Nitrile (NBR) | EPDM | Viton (FKM) |
-30° C to 90° C | -10° C to 140° C | -10° C to 180° C |
-10° C to 70° C
Media:Air, Water, Chemical, Gas
Main Features:Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment
Operating Voltage & Power Consumption:24AC | 110AC | 230AC | 12DC | 24DC |
7W | 8W | 8W | 10W | 11W |
90% Power saver series also available, Manual Override.
Coil InformationCoil Features:High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require.
Note:Use of filter in the inlet port is recommended.
Product Details:
Model Name/Number | PCE3GZ FLP |
Brand | Uflow |
Material | Stainless Steel |
Pressure | 20 Bar |
Port Size | 3/4" BSP |
DC Voltage | 24 V |
Material Grade | SS 304 |
AC Voltage | 230 V |
Frequency | 50 Hz |
Country of Origin | Made in India |
Refer below technical data sheet (Available BSP / NPT)
End Connection:Screwed / Flange
Body Material:SS ASTM A351 Grade CF8 / CF8M
Diaphragm & Media Temp:Nitrile (NBR) | EPDM | Viton (FKM) |
-30° C to 90° C | -10° C to 140° C | -10° C to 180° C |
-10° C to 70° C
Media:Air,Water,Chemical,Gas.
Main Features:Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment
Operating Voltage & Power Consumption:24AC | 110AC | 230AC | 12DC | 24DC |
7W | 8W | 8W | 10W | 11W |
90% Power saver series also available, Manual Override.
Coil InformationCoil Features:High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require.
Note:Use of filter in the inlet port is recommended.
Product Details:
Minimum Order Quantity | 1 Piece |
Valve Size | 1/2" BSP |
Pressure | 20 Bar |
Brand | Uflow |
Model Name/Number | PCN6GM FLP |
Material | SS |
Type Of Coil Protection | IP-67 Flame Proof Coil (CIMFR Approved) with Manual Overrid |
Media | Air |
Material Grade | CF8 (SS304) |
Country of Origin | Made in India |
Refer below technical data sheet (Available BSP / NPT)
End Connection:Screwed / Flange
Body Material:SS ASTM A351 Grade CF8 / CF8M
Diaphragm & Media Temp:Nitrile (NBR) | EPDM | Viton (FKM) |
-30° C to 90° C | -10° C to 140° C | -10° C to 180° C |
-10° C to 70° C
Media:Air,Water,Chemical,Gas.
Main Features:Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment
Operating Voltage & Power Consumption:24AC | 110AC | 230AC | 12DC | 24DC |
7W | 8W | 8W | 10W | 11W |
90% Power saver series also available, Manual Override.
Coil InformationCoil Features:High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require.
Note:Use of filter in the inlet port is recommended.
Product Details:
Valve Size | 1-1/2" BSP |
Pressure | 20 Bar |
Brand | Uflow |
Model Name/Number | PCN6GM FLP |
Material | Stainless Steel |
Type Of Coil Protection | IP-67 |
Media | Air |
Refer below technical data sheet (Available BSP / NPT)
End Connection:Screwed / Flange
Body Material:SS ASTM A351 Grade CF8 / CF8M
Diaphragm & Media Temp:Nitrile (NBR) | EPDM | Viton (FKM) |
-30° C to 90° C | -10° C to 140° C | -10° C to 180° C |
-10° C to 70° C
Media:Air,Water,Chemical,Gas.
Main Features:Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment
Operating Voltage & Power Consumption:24AC | 110AC | 230AC | 12DC | 24DC |
7W | 8W | 8W | 10W | 11W |
90% Power saver series also available, Manual Override.
Coil InformationCoil Features:High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require.
Note:Use of filter in the inlet port is recommended.
Product Details:
Minimum Order Quantity | 1 Piece |
Media | Gas |
Model Name/Number | PCN38F |
Control Type | Solenoid Coil |
Brand | Uflow |
Material | Stainless Steel |
Port Size | 3/4" BSP/NPT F |
Frequency | 50 Hz |
Diaphragm | NBR |
Orifice | 16.50 mm |
Power Consumption | 9W |
DC Voltage | 24V |
Pressure Range | 12 Bar |
AC Operating Voltage | 230V |
Body Material |
SS304 (ASTM A351 CF8) Optional |
Pressure Range |
0.5 Bar to 12 Bar |
Diaphragm |
(Nitrile Bunna Rubber) Optional EPDM, FKM (VITON) |
Media Temperature |
-30 °C to 90 °C |
Power Consumption |
7W, 8W, 10W, 11W |
Feature |
Metallic Round Enclosure Coil with Lead Wire |
Media |
Air, Water, Gas, Oil |
Type |
Normally Closed – Normally Open Type available |
Certification |
ISO, CE, CMRI, BIS, Etc…. |
Product Details:
Valve Size | 3/4" NPT |
Pressure | 12 Bar |
Brand | Uflow |
Model Name/Number | PMN38N-FLP |
Material | Stainless Steel |
Type Of Coil Protection | IP-67 Flame Proof Coil (CIMFR Approved) |
Media | Gas |
Material Grade | CF8M (SS-316) |
Country of Origin | Made in India |
Refer below technical data sheet (Available BSP / NPT)
End Connection:Screwed / Flange
Body Material:SS ASTM A351 Grade CF8 / CF8M
Diaphragm & Media Temp:Nitrile (NBR) | EPDM | Viton (FKM) |
-30° C to 90° C | -10° C to 140° C | -10° C to 180° C |
-10° C to 70° C
Media:Air,Water,Chemical,Gas.
Main Features:Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment
Operating Voltage & Power Consumption:24AC | 110AC | 230AC | 12DC | 24DC |
7W | 8W | 8W | 10W | 11W |
90% Power saver series also available, Manual Override.
Coil InformationCoil Features:High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require.
Note:Use of filter in the inlet port is recommended.
Product Details:
Minimum Order Quantity | 1000 Piece |
Usage/Application | Water |
Model Name/Number | PCN |
Control Type | Solenoid Coil |
Brand | Uflow |
Material | Stainless Steel |
Pressure | 12 Bar |
Color | Silver |
Port Size | 1/2" |
Material Grade | SS316 |
Voltage | AC 230V |
Frequency | 50 Hz |
Country of Origin | Made in India |
Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
End Connection: | Screwed / Flange | ||||||||||
Body Material: | SS ASTM A351 Grade CF8 / CF8M | ||||||||||
Diaphragm & Media Temp: |
| ||||||||||
Circumstance Temp: | -10° C to 70° C | ||||||||||
Media: | Air,Water,Chemical,Gas. | ||||||||||
Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment | ||||||||||
Operating Voltage & Power Consumption: |
| ||||||||||
Optional Feature: | 90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces. | ||||||||||
Other Specification Data: | Available on Request - High Pressure 20Kg Series. |
Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require. |
---|---|
Note: | Use of filter in the inlet port is recommended. |
Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm² | Max. Operating Pressure Kg/cm² | Seal & Diaphragm Material | Flow Factor Kv m³ / hr |
---|---|---|---|---|---|---|---|
PCN28 | CF8 / CF8M | ½” | 17 | 0.5 | 12 | NBR / EPDM / VITON | 03.20 |
PCN38 | CF8 / CF8M | ¾” | 20 | 0.5 | 12 | NBR / EPDM / VITON | 5 |
PCN48 | CF8 / CF8M | 1” | 25 | 0.5 | 12 | NBR / EPDM / VITON | 8.20 |
PCN58 | CF8 / CF8M | 1¼” | 36 | 0.5 | 12 | NBR / EPDM / VITON | 12.20 |
PCN68 | CF8 / CF8M | 1½” | 36 | 0.5 | 12 | NBR / EPDM / VITON | 17.10 |
PCN88 | CF8 / CF8M | 2” | 48 | 0.5 | 12 | NBR / EPDM / VITON | 29.90 |
PCN98 | CF8 / CF8M | 2½” | 60 | 0.5 | 12 | NBR / EPDM / VITON | 43.50 |
PCNA8 | CF8 / CF8M | 3” | 72 | 0.5 | 12 | NBR / EPDM / VITON | 64.50 |
Product Details:
Brand | Uflow |
Media | Water |
Material | Stainless Steel |
Model Name/Number | PCN28 |
Orifice | 17.00 mm |
AC Voltage | 230V |
Media Temperature | 90 Degree C |
Power Consumption | 7 W |
DC Voltage | 24V |
Material Grade | SS 304 |
Port Size | 1/2" BSP / NPT F |
Body Material |
SS304 (ASTM A351 CF8) Optional SS316 |
Pressure Range |
0.5 Bar to 12 Bar |
Diaphragm |
NBR (Nitrile Bunna Rubber) Optional EPDM, FKM (VITON) |
Media Temperature |
-30 °C to 90 °C |
Power Consumption |
8W, 9W, 10W, 11W |
Feature |
Metallic Round Enclosure Coil with Lead Wire |
Media |
Air, Water, Gas, Oil |
Type |
Normally Closed – Normally Open Type available |
Certification |
ISO, CE, CMRI, BIS, Etc…. |
Additional Information:
Product Details:
Minimum Order Quantity | 1000 Piece |
Media | Gas |
Usage/Application | Air |
Brand | Uflow |
Valve Size | 1/4" BSP |
Material | Aluminium |
Pressure | 10 Bar |
Flow Rate | 1200 lpm |
Power Consumption | 11W |
Ambient/Medium Temperature | 60 Degree C |
Model Number | TFA1R |
TFA1R
Type:5X2
Design:Poppet Type
Port Size:In/Out/Exhaust - 1/4” BSP
Working Pressure Range:2 - 10 bar
Media:Compressed Air, Filtered & Lubricated
Orifice:7mm
Ambient/Medium Temperature:5° - 60° C
Flow:1200 lpm
Materials of Construction:Aluminium, Nitrile, Brass, Polymer
Coil InformationOperating Voltage & Power Consumption:24AC | 110AC | 230AC | 12DC | 24DC |
7W | 8W | 8W | 10W | 11W |
High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position or freely movable in between as require.
Coil Housing:Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure.
Product Details:
Minimum Order Quantity | 10 Piece |
Model Name/Number | PMN6G |
Control Type | Electronic Operated |
Brand | Uflow |
Material | Stainless Steel |
Pressure | 20 Bar |
Port Size | 1-1/2" BSP |
Voltage | 230V |
DC Voltage | 24V |
Frequency | 50 Hz |
Country of Origin | Made in India |
Product Details:
Minimum Order Quantity | 1000 Piece |
Model Name/Number | HCP |
Control Type | Solenoid Coil |
Brand | Uflow |
Material | Stainless Steel |
Pressure | 12 Bar |
Color | Silver |
Port Size | 2" |
Power Consumption | 8W |
Material Grade | SS304 |
Country of Origin | Made in India |
Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
End Connection: | Screwed / Flange | ||||||||||
Body Material: | SS ASTM A351 Grade CF8 / CF8M | ||||||||||
Media Temp: | -10° C to 180° C | ||||||||||
Seal & ‘O’ Ring: | PTFE + Silicon / Viton | ||||||||||
Circumstance Temp: | -10° C to 70° C | ||||||||||
Media: | Steam, Hot Water, Hot Fluid, Water Oil | ||||||||||
Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
Operating Voltage & Power Consumption: |
|
||||||||||
Optional Feature: | 90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces. | ||||||||||
Other Specification Data: | Available on Request |
Coil Features: | High Reliability Unaffected by Voltage Surges.Easy coil changes coil lockable in 4X90 position or freely movable in between as require. |
---|---|
Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flame proof enclosure, IP-68 Weather proof enclosure. |
Note: | Use of filter in the inlet port is recommended. |
Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm² | Max. Operating Pressure Kg/cm² | Seal & Diaphragm Material | Flow Factor Kv m³ / hr |
---|---|---|---|---|---|---|---|
HCP29 | CF8 / CF8M | ½” | 17 | 1.5 | 12 | PTFE | 4 |
HCP39 | CF8 / CF8M | ¾” | 20 | 1.5 | 12 | PTFE | 7 |
HCP49 | CF8 / CF8M | 1” | 25 | 1.5 | 12 | PTFE | 12 |
HCP59 / HCP69 | CF8 / CF8M | 1¼” / 1½” | 36 | 1.5 | 12 | PTFE | 23 |
HCP89 | CF8 / CF8M | 2” | 48 | 1.5 | 12 | PTFE | 38 |
HCP2A | CF8 / CF8M | ½” | 17 | 1.5 | 40 | PTFE | 3.50 |
HCP3A | CF8 / CF8M | ¾” | 20 | 1.5 | 40 | PTFE | 3.30 |
HCP4A | CF8 / CF8M | 1” | 25 | 1.5 | 40 | PTFE | 8.30 |
HCP5A / HCP6A | CF8 / CF8M | 1¼” / 1½” | 36 | 1.5 | 40 | PTFE | 17 |
HCP8A | CF8 / CF8M | 2” | 48 | 1.5 | 40 | PTFE | 31 |
Product Details:
Minimum Order Quantity | 1000 Piece |
Model Name/Number | HCP |
Control Type | Solenoid Coil |
Brand | Uflow |
Material | Stainless Steel |
Pressure | 12 Bar |
Port Size | 2" |
Material Grade | SS316 |
Country of Origin | Made in India |
Coil Features: | High Reliability Unaffected by Voltage Surges.Easy coil changes coil lockable in 4X90 position or freely movable in between as require. |
---|---|
Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flame proof enclosure, IP-68 Weather proof enclosure. |
Note: | Use of filter in the inlet port is recommended. |
Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm² | Max. Operating Pressure Kg/cm² | Seal & Diaphragm Material | Flow Factor Kv m³ / hr |
---|---|---|---|---|---|---|---|
HCP29 | CF8 / CF8M | ½” | 17 | 1.5 | 12 | PTFE | 4 |
HCP39 | CF8 / CF8M | ¾” | 20 | 1.5 | 12 | PTFE | 7 |
HCP49 | CF8 / CF8M | 1” | 25 | 1.5 | 12 | PTFE | 12 |
HCP59 / HCP69 | CF8 / CF8M | 1¼” / 1½” | 36 | 1.5 | 12 | PTFE | 23 |
HCP89 | CF8 / CF8M | 2” | 48 | 1.5 | 12 | PTFE | 38 |
HCP2A | CF8 / CF8M | ½” | 17 | 1.5 | 40 | PTFE | 3.50 |
HCP3A | CF8 / CF8M | ¾” | 20 | 1.5 | 40 | PTFE | 3.30 |
HCP4A | CF8 / CF8M | 1” | 25 | 1.5 | 40 | PTFE | 8.30 |
HCP5A / HCP6A | CF8 / CF8M | 1¼” / 1½” | 36 | 1.5 | 40 | PTFE | 17 |
HCP8A | CF8 / CF8M | 2” | 48 | 1.5 | 40 | PTFE | 31 |
Product Details:
Model Name/Number | PCN68 |
Size | 1-1/2" |
Control Type | Electronics |
Connection Type | Spigots |
Brand | Uflow |
Material | Stainless Steel |
Media Type | Gas |
Voltage | 230V |
Material Grade | SS316 |
Country of Origin | Made in India |
Product Details:
Minimum Order Quantity | 1000 Piece |
Usage/Application | Air |
Model Name/Number | AFA1 |
Brand | Uflow |
Pressure | 10 Bar |
Port Size | 1/4" BSP |
Medium | Compressed Air |
Flow | 1200 lpm |
Materials of Construction | Aluminium |
Pilot Pressure | 8 bar |
Ambient/Medium Temperature | 60 Degree C |
Design | Spool with Cartridge Type |
Country of Origin | Made in India |
Type: |
5X2 |
Port Size: |
In/Out - BSP & Exhaust/Pilot Port 1/8” BSP |
Medium: |
Filtered & Lubricated |
Working Pressure Range: |
2 - 10 bar |
Ambient/Medium Temperature: |
5°- 60° C |
Materials of Construction: |
Nitrile, Brass, Polymer |
Pilot Pressure Range: |
2.5 - 8 bar |
Additional Information:
Product Details:
Minimum Order Quantity | 1000 Piece |
Material | Aluminium |
Usage/Application | Air |
Model Name/Number | AFA1D |
Brand | Uflow |
Pressure | 10 Bar |
Port Size | In/Out - 1/4" BSP & Exhaust/Pilot Port 1/8" BSP |
Flow Rate | 1200 lpm |
Pilot Pressure | 8 Bar |
Design | Spool with Cartridge Type |
Medium | Compressed Air |
Country of Origin | Made in India |
Working Pressure Range: |
2 - 10 bar |
Ambient/Medium Temperature: |
5°- 60° C |
Materials of Construction: |
Nitrile, Brass, Polymer |
Pilot Pressure Range: |
2.5 - 8 bar |
Product Details:
Minimum Order Quantity | 1000 Piece |
Material | Aluminium |
Usage/Application | Air |
Model Name/Number | ATA1D |
Brand | Uflow |
Pressure | 10 Bar |
Port Size | In/Out/Exhaust - 1/4" BSP & Pilot Port 1/8" BSP |
Flow Rate | 1200 lpm |
Medium | Compressed Air |
Pilot Pressure | 8 Bar |
Design | Spool with Cartridge Type |
Country of Origin | Made in India |
Type: |
3X2 |
Working Pressure Range: |
2 - 10 bar |
Ambient/Medium Temperature: |
5??- 60?? C |
Materials of Construction: |
Nitrile, Brass, Polymer |
Pilot Pressure Range: |
2.5 - 8 bar |
Product Details:
Minimum Order Quantity | 1000 Piece |
Model Name/Number | HCP |
Control Type | Solenoid Coil |
Brand | Uflow |
Material | SS |
Pressure | 40 Bar |
Color | Silver |
Port Size | 2" |
Material Grade | SS304 |
Country of Origin | Made in India |
Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
End Connection: | Screwed / Flange | ||||||||||
Body Material: | SS ASTM A351 Grade CF8 / CF8M | ||||||||||
Media Temp: | -10?? C to 180?? C | ||||||||||
Seal & ???O??? Ring: | PTFE + Silicon / Viton | ||||||||||
Circumstance Temp: | -10?? C to 70?? C | ||||||||||
Media: | Steam, Hot Water, Hot Fluid, Water Oil | ||||||||||
Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
Operating Voltage & Power Consumption: |
|
||||||||||
Optional Feature: | 90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces. | ||||||||||
Other Specification Data: | Available on Request |
Coil Features: | High Reliability Unaffected by Voltage Surges.Easy coil changes coil lockable in 4X90 position or freely movable in between as require. |
---|---|
Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flame proof enclosure, IP-68 Weather proof enclosure. |
Note: | Use of filter in the inlet port is recommended. |
Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm?? | Max. Operating Pressure Kg/cm?? | Seal & Diaphragm Material | Flow Factor Kv m?? / hr |
---|---|---|---|---|---|---|---|
HCP29 | CF8 / CF8M | ????? | 17 | 1.5 | 12 | PTFE | 4 |
HCP39 | CF8 / CF8M | ????? | 20 | 1.5 | 12 | PTFE | 7 |
HCP49 | CF8 / CF8M | 1??? | 25 | 1.5 | 12 | PTFE | 12 |
HCP59 / HCP69 | CF8 / CF8M | 1????? / 1????? | 36 | 1.5 | 12 | PTFE | 23 |
HCP89 | CF8 / CF8M | 2??? | 48 | 1.5 | 12 | PTFE | 38 |
HCP2A | CF8 / CF8M | ????? | 17 | 1.5 | 40 | PTFE | 3.50 |
HCP3A | CF8 / CF8M | ????? | 20 | 1.5 | 40 | PTFE | 3.30 |
HCP4A | CF8 / CF8M | 1??? | 25 | 1.5 | 40 | PTFE | 8.30 |
HCP5A / HCP6A | CF8 / CF8M | 1????? / 1????? | 36 | 1.5 | 40 | PTFE | 17 |
HCP8A | CF8 / CF8M | 2??? | 48 | 1.5 | 40 | PTFE | 31 |
Additional Information:
Product Details:
Minimum Order Quantity | 1000 Piece |
Material | Aluminium |
Model Name/Number | ATA1 |
Brand | Uflow |
Pressure | 10 Bar |
Type | Directional Control Single Solenoid Valve |
Port Size | 1/8" BSP |
Ambient/Medium Temperature | 60 Degree C |
Max Flow Rate | 1200 lpm |
Pilot Pressure | 8 Bar |
Medium | Filtered & Lubricated |
Country of Origin | Made in India |
Model No: |
ATA1Z |
Type: |
3X2 |
Design: |
Spool with Cartridge Type |
Port Size: |
In/Out/Exhaust - 1/4??? BSP & Pilot Port |
Working Pressure Range: |
2 - 10 bar |
Ambient/Medium Temperature: |
5- 60 Degree C |
Pilot Pressure Range: |
2.5 - 8 bar |
Product Details:
Minimum Order Quantity | 1000 Piece |
Usage/Application | Air |
Model Name/Number | ATA1Z |
Brand | Uflow |
Pressure | 10 Bar |
Port Size | In/Out/Exhaust: 1/4" BSP & Pilot Port 1/8" BSP |
Flow Rate | 1200 lpm |
Materials of Construction | Aluminum |
Design | Spool with Cartridge Type |
Pilot Pressure | 8 Bar |
AC Voltage | 230V |
Frequency | 50 Hz |
DC Voltage | 24V |
Medium | Compressed Air |
Country of Origin | Made in India |
Model No: |
ATA1 |
Type: |
3X2 |
Working Pressure Range: |
2 - 10 bar |
Ambient/Medium Temperature: |
5°- 60° C |
Materials of Construction: |
Nitrile, Brass, Polymer |
Pilot Pressure Range: |
2.5 - 8 bar |
Additional Information:
Product Details:
Minimum Order Quantity | 1000 Piece |
Material | Aluminium |
Usage/Application | Air |
Model Name/Number | AFA1D |
Brand | Uflow |
Pressure | 10 Bar |
Max. Flow | 1200 lpm |
Port Size | In/Out - 1/4" BSP |
Design | Spool with Cartridge Type |
Medium | Filtered & Lubricated |
Ambient/Medium Temperature | 60 Degree C |
Pilot Pressure | 8 Bar |
Country of Origin | Made in India |
Type: |
5X2 |
Port Size: |
In/Out BSP & Exhaust/Pilot Port 1/8” BSP |
Medium: |
Filtered & Lubricated |
Working Pressure Range: |
2 - 10 bar |
Ambient/Medium Temperature: |
5°- 60° C |
Materials of Construction: |
Nitrile, Brass, Polymer |
Pilot Pressure Range: |
2.5 - 8 bar |
Product Details:
Minimum Order Quantity | 1000 Piece |
Model Name/Number | HCP |
Control Type | Solenoid Coil |
Brand | Uflow |
Material | Stainless Steel |
Pressure | 40 Bar |
Color | Silver |
Port Size | 2" |
Power Consumption | 11 W |
Material Grade | SS304 |
End Connection | Screwed |
Max. Media Temperature | 180 Degree C |
Media | Steam |
Min. Media Temperature | -10 Degree C |
DC Voltage | 24DC |
Country of Origin | Made in India |
Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
End Connection: | Screwed / Flange | ||||||||||
Body Material: | SS ASTM A351 Grade CF8 / CF8M | ||||||||||
Media Temp: | -10° C to 180° C | ||||||||||
Seal & ‘O’ Ring: | PTFE + Silicon / Viton | ||||||||||
Circumstance Temp: | -10° C to 70° C | ||||||||||
Media: | Steam, Hot Water, Hot Fluid, Water Oil | ||||||||||
Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
Operating Voltage & Power Consumption: |
|
||||||||||
Optional Feature: | 90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces. | ||||||||||
Other Specification Data: | Available on Request |
Coil Features: | High Reliability Unaffected by Voltage Surges.Easy coil changes coil lockable in 4X90 position or freely movable in between as require. |
---|---|
Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flame proof enclosure, IP-68 Weather proof enclosure. |
Note: | Use of filter in the inlet port is recommended. |
Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm² | Max. Operating Pressure Kg/cm² | Seal & Diaphragm Material | Flow Factor Kv m³ / hr |
---|---|---|---|---|---|---|---|
HCP29 | CF8 / CF8M | ½” | 17 | 1.5 | 12 | PTFE | 4 |
HCP39 | CF8 / CF8M | ¾” | 20 | 1.5 | 12 | PTFE | 7 |
HCP49 | CF8 / CF8M | 1” | 25 | 1.5 | 12 | PTFE | 12 |
HCP59 / HCP69 | CF8 / CF8M | 1¼” / 1½” | 36 | 1.5 | 12 | PTFE | 23 |
HCP89 | CF8 / CF8M | 2” | 48 | 1.5 | 12 | PTFE | 38 |
HCP2A | CF8 / CF8M | ½” | 17 | 1.5 | 40 | PTFE | 3.50 |
HCP3A | CF8 / CF8M | ¾” | 20 | 1.5 | 40 | PTFE | 3.30 |
HCP4A | CF8 / CF8M | 1” | 25 | 1.5 | 40 | PTFE | 8.30 |
HCP5A / HCP6A | CF8 / CF8M | 1¼” / 1½” | 36 | 1.5 | 40 | PTFE | 17 |
HCP8A | CF8 / CF8M | 2” | 48 | 1.5 | 40 | PTFE | 31 |
Additional Information:
Product Details:
Minimum Order Quantity | 1000 Piece |
Model Name/Number | HCP |
Control Type | Solenoid Coil |
Brand | Uflow |
Material | Stainless Steel |
Pressure | 12 Bar |
Port Size | 3/4" |
Voltage | 230V |
Material Grade | SS-304 |
Country of Origin | Made in India |
Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
End Connection: | Screwed / Flange | ||||||||||
Body Material: | SS ASTM A351 Grade CF8 / CF8M | ||||||||||
Media Temp: | -10° C to 180° C | ||||||||||
Seal & ‘O’ Ring: | PTFE + Silicon / Viton | ||||||||||
Circumstance Temp: | -10° C to 70° C | ||||||||||
Media: | Steam, Hot Water, Hot Fluid, Water Oil | ||||||||||
Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
Operating Voltage & Power Consumption: |
|
||||||||||
Optional Feature: | 90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces. | ||||||||||
Other Specification Data: | Available on Request |
Coil Features: | High Reliability Unaffected by Voltage Surges.Easy coil changes coil lockable in 4X90 position or freely movable in between as require. |
---|---|
Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flame proof enclosure, IP-68 Weather proof enclosure. |
Note: | Use of filter in the inlet port is recommended. |
Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm² | Max. Operating Pressure Kg/cm² | Seal & Diaphragm Material | Flow Factor Kv m³ / hr |
---|---|---|---|---|---|---|---|
HCP29 | CF8 / CF8M | ½” | 17 | 1.5 | 12 | PTFE | 4 |
HCP39 | CF8 / CF8M | ¾” | 20 | 1.5 | 12 | PTFE | 7 |
HCP49 | CF8 / CF8M | 1” | 25 | 1.5 | 12 | PTFE | 12 |
HCP59 / HCP69 | CF8 / CF8M | 1¼” / 1½” | 36 | 1.5 | 12 | PTFE | 23 |
HCP89 | CF8 / CF8M | 2” | 48 | 1.5 | 12 | PTFE | 38 |
HCP2A | CF8 / CF8M | ½” | 17 | 1.5 | 40 | PTFE | 3.50 |
HCP3A | CF8 / CF8M | ¾” | 20 | 1.5 | 40 | PTFE | 3.30 |
HCP4A | CF8 / CF8M | 1” | 25 | 1.5 | 40 | PTFE | 8.30 |
HCP5A / HCP6A | CF8 / CF8M | 1¼” / 1½” | 36 | 1.5 | 40 | PTFE | 17 |
HCP8A | CF8 / CF8M | 2” | 48 | 1.5 | 40 | PTFE | 31 |
Product Details:
Minimum Order Quantity | 1000 Piece |
Model Name/Number | HCP |
Control Type | Solenoid Coil |
Brand | Uflow |
Material | Stainless Steel |
Pressure | 12 Bar |
Port Size | 2" |
Voltage | 230V |
Material Grade | SS304 |
Country of Origin | Made in India |
Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
End Connection: | Screwed / Flange | ||||||||||
Body Material: | SS ASTM A351 Grade CF8 / CF8M | ||||||||||
Media Temp: | -10° C to 180° C | ||||||||||
Seal & ‘O’ Ring: | PTFE + Silicon / Viton | ||||||||||
Circumstance Temp: | -10° C to 70° C | ||||||||||
Media: | Steam, Hot Water, Hot Fluid, Water Oil | ||||||||||
Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
Operating Voltage & Power Consumption: |
|
||||||||||
Optional Feature: | 90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces. | ||||||||||
Other Specification Data: | Available on Request |
Coil Features: | High Reliability Unaffected by Voltage Surges.Easy coil changes coil lockable in 4X90 position or freely movable in between as require. |
---|---|
Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flame proof enclosure, IP-68 Weather proof enclosure. |
Note: | Use of filter in the inlet port is recommended. |
Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm² | Max. Operating Pressure Kg/cm² | Seal & Diaphragm Material | Flow Factor Kv m³ / hr |
---|---|---|---|---|---|---|---|
HCP29 | CF8 / CF8M | ½” | 17 | 1.5 | 12 | PTFE | 4 |
HCP39 | CF8 / CF8M | ¾” | 20 | 1.5 | 12 | PTFE | 7 |
HCP49 | CF8 / CF8M | 1” | 25 | 1.5 | 12 | PTFE | 12 |
HCP59 / HCP69 | CF8 / CF8M | 1¼” / 1½” | 36 | 1.5 | 12 | PTFE | 23 |
HCP89 | CF8 / CF8M | 2” | 48 | 1.5 | 12 | PTFE | 38 |
HCP2A | CF8 / CF8M | ½” | 17 | 1.5 | 40 | PTFE | 3.50 |
HCP3A | CF8 / CF8M | ¾” | 20 | 1.5 | 40 | PTFE | 3.30 |
HCP4A | CF8 / CF8M | 1” | 25 | 1.5 | 40 | PTFE | 8.30 |
HCP5A / HCP6A | CF8 / CF8M | 1¼” / 1½” | 36 | 1.5 | 40 | PTFE | 17 |
HCP8A | CF8 / CF8M | 2” | 48 | 1.5 | 40 | PTFE | 31 |
Product Details:
Minimum Order Quantity | 1 Piece |
Valve Size | 1/2" BSP |
Pressure | 20 Bar |
Brand | Uflow |
Model Name/Number | PCN6GM FLP |
Material | Stainless Steel |
Type Of Coil Protection | IP-67 |
Media | Water |
Material Grade | SS304 |
Country of Origin | Made in India |
Refer below technical data sheet (Available BSP / NPT)
End Connection:Screwed / Flange
Body Material:SS ASTM A351 Grade CF8 / CF8M
Diaphragm & Media Temp:Nitrile (NBR) | EPDM | Viton (FKM) |
-30° C to 90° C | -10° C to 140° C | -10° C to 180° C |
-10° C to 70° C
Media:Air,Water,Chemical,Gas.
Main Features:Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment
Operating Voltage & Power Consumption:24AC | 110AC | 230AC | 12DC | 24DC |
7W | 8W | 8W | 10W | 11W |
90% Power saver series also available, Manual Override.
Coil InformationCoil Features:High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require.
Note:Use of filter in the inlet port is recommended.
Product Details:
Valve Size | 1/2" BSP |
Pressure | 20 Bar |
Brand | Uflow |
Model Name/Number | PCN88 |
Material | CF8 (SS304) |
Type Of Coil Protection | IP-67 Flame Proof Coil (CIMFR Approved) with Manual Overrid |
Media | Gas |
Refer below technical data sheet (Available BSP / NPT)
End Connection:Screwed / Flange
Body Material:SS ASTM A351 Grade CF8 / CF8M
Diaphragm & Media Temp:Nitrile (NBR) | EPDM | Viton (FKM) |
-30° C to 90° C | -10° C to 140° C | -10° C to 180° C |
-10° C to 70° C
Media:Air,Water,Chemical,Gas.
Main Features:Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment
Operating Voltage & Power Consumption:24AC | 110AC | 230AC | 12DC | 24DC |
7W | 8W | 8W | 10W | 11W |
90% Power saver series also available, Manual Override.
Coil InformationCoil Features:High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require.
Note:Use of filter in the inlet port is recommended.
Product Details:
Valve Size | 1/2" BSP |
Pressure | 20 Bar |
Brand | Uflow |
Model Name/Number | PCN68 |
Material | Stainless Steel |
Type Of Coil Protection | IP-67 |
Media | Air |
Material Grade | SS 304 |
Country of Origin | Made in India |
Refer below technical data sheet (Available BSP / NPT)
End Connection:Screwed / Flange
Body Material:SS ASTM A351 Grade CF8 / CF8M
Diaphragm & Media Temp:Nitrile (NBR) | EPDM | Viton (FKM) |
-30° C to 90° C | -10° C to 140° C | -10° C to 180° C |
-10° C to 70° C
Media:Air,Water,Chemical,Gas.
Main Features:Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment
Operating Voltage & Power Consumption:24AC | 110AC | 230AC | 12DC | 24DC |
7W | 8W | 8W | 10W | 11W |
90% Power saver series also available, Manual Override.
Coil InformationCoil Features:High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require.
Note:Use of filter in the inlet port is recommended.
Product Details:
Minimum Order Quantity | 5 Piece |
Brand | Uflow |
Media | Oil |
Material | Stainless Steel |
Model Name/Number | PCNA6F |
Orifice | 72.00 mm |
Power Consumption | 11 W |
DC Operating Voltage | 24 V |
Frequency | 50 Hz |
Port Size | 3" |
Media Temperature | 90 Degree C |
AC Operating Voltage | 230V |
Material Grade | SS316 |
Body Material | SS |
Pressure Range | 12 Bar |
Country of Origin | Made in India |
Body Material |
SS304 (ASTM A351 CF8) Optional SS316 |
Pressure Range |
0.5 Bar to 12 Bar |
Diaphragm |
NBR (Nitrile Bunna Rubber) Optional EPDM, FKM (VITON) |
Media Temperature |
-30 °C to 90 °C |
Operating Voltage |
AC : 24V, 110V, DC: 12V |
Power Consumption |
7W, 8W, 9W, 10W |
Feature |
Metallic Round Enclosure Coil with Lead Wire |
Media |
Air, Water, Gas |
Type |
Normally Closed – Normally Open Type available |
Certification |
ISO, CE, CMRI, BIS, Etc…. |
Product Details:
Minimum Order Quantity | 5 Piece |
Media | Water |
Brand | Uflow |
Valve Size | 2" |
Material | Stainless Steel |
Frequency | 50 Hz |
Power Consumption | 9 W |
Orifice | 48.00 mm |
Media Temperature | 90 Degree C |
Operating Voltage | AC 230V |
Model Number | PCN88F |
Pressure Range | 12 Bar |
Material Grade | SS304 |
Country of Origin | Made in India |
Body Material |
(ASTM A351 CF8) Optional SS316 |
Pressure Range |
0.5 Bar to 12 Bar |
Diaphragm |
NBR (Nitrile Bunna Rubber) Optional EPDM, FKM (VITON) |
Media Temperature |
-30 °C to 90 °C |
Operating Voltage |
AC : 24V, 110V, DC: 12V, 24V |
Power Consumption |
7W, 8W, 10W, 11W |
Feature |
Metallic Round Enclosure Coil with Lead Wire |
Media |
Air, Gas, Oil |
Type |
Normally Closed – Normally Open Type available |
Certification |
ISO, CE, CMRI, BIS, Etc…. |
Product Details:
Minimum Order Quantity | 5 Number |
Media | Gas |
Brand | Uflow |
Material | Stainless Steel |
Model Name/Number | PCN96F |
Diaphragm | NBR |
Media Temperature | 90 Degree C |
Pressure Range | 0.5 Bar to 12 Bar |
Power Consumption | 9 W |
Frequency | 50 Hz |
Body Material Grade | SS304 |
DC Operating Voltage | 24V |
AC Operating Voltage | 230V |
Orifice | 60.00 mm |
Country of Origin | Made in India |
Port Size |
2-1/2” |
Body Material |
(ASTM A351 CF8) Optional SS316 |
Pressure Range |
0.5 Bar to 12 Bar |
Diaphragm |
(Nitrile Bunna Rubber) Optional EPDM, FKM (VITON) |
Media Temperature |
-30 °C to 90 °C |
Operating Voltage |
AC : 24V, 110V, DC: 12V, 24V |
Power Consumption |
7W, 8W, 10W, 11W |
Feature |
Metallic Round Enclosure Coil with Lead Wire |
Media |
Air, Water, Oil |
Type |
Normally Closed – Normally Open Type available |
Certification |
ISO, CE, CMRI, BIS, Etc…. |
Product Details:
Minimum Order Quantity | 2 Piece |
Brand | Uflow |
Media | Oil |
Model Name/Number | PCNA6 |
Diaphragm | FKM (Viton) |
Orifice | 72.00 mm |
Port Size | 3" BSP / NPT F |
Material Grade | SS316 |
Power Consumption | 11 W |
Body Material | SS |
Operating AC Voltage | 230V |
Pressure Range | 12 Bar |
Media Temperature | 90 Degree C |
Frequency | 50 Hz |
Operating DC Voltage | 24 V |
Country of Origin | Made in India |
Body Material |
SS304 (ASTM A351 CF8) Optional SS316 |
Pressure Range |
0.5 Bar to 12 Bar |
Diaphragm |
NBR (Nitrile Bunna Rubber) Optional EPDM |
Media Temperature |
-30 °C to 90 °C |
Operating Voltage |
AC : 24V, 110V, (50HZ) DC: 12V |
Power Consumption |
7W, 8W, 9W, 10W |
Feature |
Metallic Round Enclosure Coil with Lead Wire |
Media |
Air, Water, Gas |
Type |
Normally Closed – Normally Open Type available |
Certification |
ISO, CE, CMRI, BIS, Etc…. |
Product Details:
Media | Gas |
Brand | Uflow |
Material | SS |
Pressure | 12 Bar |
Model Name/Number | PCN96 |
Frequency | 50 Hz |
Orifice | 60 mm |
Material Grade | SS304 |
Operating DC Voltage | 24 V |
Operating AC Voltage | 230V |
Media Temperature | 90 Degree C |
Power Consumption | 10 W |
Port Size | 1/2" BSP / NPT F |
Port Size |
2-1/2” BSP / NPT F |
Body Material |
(ASTM A351 CF8) Optional SS316 |
Pressure Range |
0.5 Bar to 12 Bar |
Diaphragm |
NBR (Nitrile Bunna Rubber) Optional EPDM, FKM (VITON) |
Media Temperature |
-30 °C to 90 °C |
Operating Voltage |
AC : 24V, 110V, DC: 12V |
Power Consumption |
7W, 8W, 9W, 11W |
Feature |
Metallic Round Enclosure Coil with Lead Wire |
Media |
Air, Water, Oil |
Type |
Normally Closed – Normally Open Type available |
Certification |
ISO, CE, CMRI, BIS, Etc…. |
Product Details:
Model Name/Number | PBN460M-LED |
Control Type | Epoxy Square Coil with LED Din Connector with Manual override |
Brand | Uflow |
Material | Brass |
Pressure | 10 Bar |
Port Size | 1" BSP |
Voltage | AC 230V |
Frequency | 50Hz |
DC Voltage | 24V |
Refer below technical data sheet (Available BSP / NPT)
End Connection:Screwed / Flange
Body Material:SS ASTM A351 Grade CF8 / CF8M, Forged Brass
Diaphragm & Media Temp:Nitrile(NBR) | EPDM | Viton(FKM) |
-30°C to 90°C | -10°C to 140°C | -10°C to 180°C |
-10° C to 70° C
Media:Steam, Hot Water, Hot Fluid, Water Oil
Main Features:Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment.
Operating Voltage & Power Consumption:24AC | 110AC | 230AC | 12DC | 24DC |
7W | 8W | 8W | 10W | 11W |
90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces.
Other Specification Data:Available on Request
Coil InformationCoil Features:High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position or freely movable in between as require.
Coil Housing:Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure
Note:Use of filter in the inlet port is recommended.
Product Details:
Model Name/Number | PBN460M-LED |
Control Type | Epoxy Square Coil with LED Din Connector with Manual override |
Brand | Uflow |
Material | Brass |
Pressure | 10 Bar |
Port Size | 1" BSP |
Power Source | Electric |
Voltage | 230V |
Power Consumption | 6W |
Coil Code | MAG065 |
Frequency | 50 Hz |
Refer below technical data sheet (Available BSP / NPT)
End Connection:Screwed / Flange
Body Material:SS ASTM A351 Grade CF8 / CF8M, Forged Brass
Diaphragm & Media Temp:Nitrile(NBR) | EPDM | Viton(FKM) |
-30°C to 90°C | -10°C to 140°C | -10°C to 180°C |
-10° C to 70° C
Media:Steam, Hot Water, Hot Fluid, Water Oil
Main Features:Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment.
Operating Voltage & Power Consumption:24AC | 110AC | 230AC | 12DC | 24DC |
7W | 8W | 8W | 10W | 11W |
90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces.
Other Specification Data:Available on Request
Coil InformationCoil Features:High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position or freely movable in between as require.
Coil Housing:Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure
Note:Use of filter in the inlet port is recommended.
Product Details:
Minimum Order Quantity | 1000 Piece |
Model Name/Number | M-I-S |
Control Type | Solenoid Coil |
Brand | Uflow |
Material | Stainless Steel |
Pressure | 12 Bar |
Color | Silver |
Port Size | 4" |
Voltage | 220V |
Material Grade | SS316 |
Country of Origin | Made in India |
Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
End Connection: | Screwed / Flange | ||||||||||
Body Material: | SS ASTM A351 Grade CF8 / CF8M | ||||||||||
Diaphragm & Media Temp: |
| ||||||||||
Circumstance Temp: | -10° C to 70° C | ||||||||||
Media: | Air,Water,Chemical,Gas. | ||||||||||
Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment | ||||||||||
Operating Voltage & Power Consumption: |
| ||||||||||
Optional Feature: | 90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces. | ||||||||||
Other Specification Data: | Available on Request - High Pressure 20Kg Series. |
Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require. |
---|---|
Note: | Use of filter in the inlet port is recommended. |
Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm² | Max. Operating Pressure Kg/cm² | Seal & Diaphragm Material | Flow Factor Kv m³ / hr |
---|---|---|---|---|---|---|---|
PCN28 | CF8 / CF8M | ½” | 17 | 0.5 | 12 | NBR / EPDM / VITON | 03.20 |
PCN38 | CF8 / CF8M | ¾” | 20 | 0.5 | 12 | NBR / EPDM / VITON | 5 |
PCN48 | CF8 / CF8M | 1” | 25 | 0.5 | 12 | NBR / EPDM / VITON | 8.20 |
PCN58 | CF8 / CF8M | 1¼” | 36 | 0.5 | 12 | NBR / EPDM / VITON | 12.20 |
PCN68 | CF8 / CF8M | 1½” | 36 | 0.5 | 12 | NBR / EPDM / VITON | 17.10 |
PCN88 | CF8 / CF8M | 2” | 48 | 0.5 | 12 | NBR / EPDM / VITON | 29.90 |
PCN98 | CF8 / CF8M | 2½” | 60 | 0.5 | 12 | NBR / EPDM / VITON | 43.50 |
PCNA8 | CF8 / CF8M | 3” | 72 | 0.5 | 12 | NBR / EPDM / VITON | 64.50 |
Product Details:
Minimum Order Quantity | 1000 Piece |
Model Name/Number | PCN |
Control Type | Solenoid Coil |
Brand | Uflow |
Material | SS |
Pressure | 12 Bar |
Port Size | 2" |
Voltage | 230V |
Material Grade | SS316 |
Country of Origin | Made in India |
Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
End Connection: | Screwed / Flange | ||||||||||
Body Material: | SS ASTM A351 Grade CF8 / CF8M | ||||||||||
Diaphragm & Media Temp: |
|
||||||||||
Circumstance Temp: | -10° C to 70° C | ||||||||||
Media: | Air,Water,Chemical,Gas. | ||||||||||
Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment | ||||||||||
Operating Voltage & Power Consumption: |
|
||||||||||
Optional Feature: | 90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces. | ||||||||||
Other Specification Data: | Available on Request - High Pressure 20Kg Series. |
Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require. |
---|---|
Note: | Use of filter in the inlet port is recommended. |
Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm² | Max. Operating Pressure Kg/cm² | Seal & Diaphragm Material | Flow Factor Kv m³ / hr |
---|---|---|---|---|---|---|---|
PCN28 | CF8 / CF8M | ½” | 17 | 0.5 | 12 | NBR / EPDM / VITON | 03.20 |
PCN38 | CF8 / CF8M | ¾” | 20 | 0.5 | 12 | NBR / EPDM / VITON | 5 |
PCN48 | CF8 / CF8M | 1” | 25 | 0.5 | 12 | NBR / EPDM / VITON | 8.20 |
PCN58 | CF8 / CF8M | 1¼” | 36 | 0.5 | 12 | NBR / EPDM / VITON | 12.20 |
PCN68 | CF8 / CF8M | 1½” | 36 | 0.5 | 12 | NBR / EPDM / VITON | 17.10 |
PCN88 | CF8 / CF8M | 2” | 48 | 0.5 | 12 | NBR / EPDM / VITON | 29.90 |
PCN98 | CF8 / CF8M | 2½” | 60 | 0.5 | 12 | NBR / EPDM / VITON | 43.50 |
PCNA8 | CF8 / CF8M | 3” | 72 | 0.5 | 12 | NBR / EPDM / VITON | 64.50 |
Additional Information:
Product Details:
Minimum Order Quantity | 1000 Piece |
Model Name/Number | PCN |
Control Type | Solenoid Coil |
Brand | Uflow |
Material | Stainless Steel |
Pressure | 12 Bar |
Port Size | 1" |
Max Temperature Range | 80 Degree C |
Material Grade | SS316 |
Operating Voltage | 230V |
Country of Origin | Made in India |
Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
End Connection: | Screwed / Flange | ||||||||||
Body Material: | SS ASTM A351 Grade CF8 / CF8M | ||||||||||
Diaphragm & Media Temp: |
|
||||||||||
Circumstance Temp: | -10° C to 70° C | ||||||||||
Media: | Air,Water,Chemical,Gas. | ||||||||||
Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment | ||||||||||
Operating Voltage & Power Consumption: |
|
||||||||||
Optional Feature: | 90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces. | ||||||||||
Other Specification Data: | Available on Request - High Pressure 20Kg Series. |
Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require. |
---|---|
Note: | Use of filter in the inlet port is recommended. |
Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm² | Max. Operating Pressure Kg/cm² | Seal & Diaphragm Material | Flow Factor Kv m³ / hr |
---|---|---|---|---|---|---|---|
PCN28 | CF8 / CF8M | ½” | 17 | 0.5 | 12 | NBR / EPDM / VITON | 03.20 |
PCN38 | CF8 / CF8M | ¾” | 20 | 0.5 | 12 | NBR / EPDM / VITON | 5 |
PCN48 | CF8 / CF8M | 1” | 25 | 0.5 | 12 | NBR / EPDM / VITON | 8.20 |
PCN58 | CF8 / CF8M | 1¼” | 36 | 0.5 | 12 | NBR / EPDM / VITON | 12.20 |
PCN68 | CF8 / CF8M | 1½” | 36 | 0.5 | 12 | NBR / EPDM / VITON | 17.10 |
PCN88 | CF8 / CF8M | 2” | 48 | 0.5 | 12 | NBR / EPDM / VITON | 29.90 |
PCN98 | CF8 / CF8M | 2½” | 60 | 0.5 | 12 | NBR / EPDM / VITON | 43.50 |
PCNA8 | CF8 / CF8M | 3” | 72 | 0.5 | 12 | NBR / EPDM / VITON | 64.50 |