Product Details:
Minimum Order Quantity | 1 Piece |
Valve Size | 1-1/2" BSP |
Pressure | 0.5 Bar to 20 Bar |
Media | Air Water Gas Fuel Oil |
Brand | UFLOW |
Model Name/Number | PCN6GM FLP |
Material | CF8 (SS304) |
Type Of Coil Protection | IP-67 Flame Proof Coil (CIMFR Approved) with Manual Overrid |
Port Size :
End Connection :
Body Material :
Diaphragm :
Circumstance Temp :
Media Temp:
Media :
Main Features :
Operating Voltage :
Power Consumption :
Features :
Coil Housing :
Optional Features :
Other Specification Data :
Refer below technical data sheet (Available BSP / NPT)
Screwed / Flange
SS ASTM A351 Grade CF8 / CF8M
Nitrite (NBR), Optional VITON (FKM),EPDM
-10 °C to 90 °C
-10 °C to 90 °C, -10 °C to 140 °C, -10 °C to 180 °C
Air ,Water , Chemical, Gases, Oil, Diesel, Kerosene, LPG.
Internal Parts are superior corrosion resistance steel (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical applications & Highly corrosive environment.
AC : 24V, 48V, 110V, 230V, 50Hz/60 Hz DC : 12V, 24V
AC : 5.5W, 7.5W, 8.5W, 9.5W, 10W, 11.5W, 12W DC : 10W, 11W
High Reliability Unaffected by Voltage Surges.
Easy coil changes Coil lockable in 4Χ90, Position or freely movable in between as require.
Epoxy Square Coil, Metallic Round Enclosure, IP-67 Flame Proof Enclosure, IP-68 Weather Proof Enclosure.
90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces
Available on Request.
Product Details:
Minimum Order Quantity | 1000 Piece |
Size | 1/8", 3/8", 1/4", 3/4", 1/2" |
Model Name/Number | TAN, TBN, TCN |
Brand | Uflow |
Media | Air, Water Gas Oil |
Material | Brass, Aluminium, SS304, SS316 |
Color | GOLDEN, BLACK, SILVER |
Features | Internal Parts are in superior corrosion resistance steel |
Item Code | TAN, TBN, TCN |
Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
End Connection: | Screwed | ||||||||||
Body Material: | SS ASTM A351 Grade CF8 / CF8M, Forged Brass, Aluminium | ||||||||||
Media Temp & seal o ring: |
|
||||||||||
Circumstance Temp: | -10° C to 70° C | ||||||||||
Media: | Air, Water, Chemical, Gas, Oil, Diesel, Kerosene, LPG. | ||||||||||
Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
Operating Voltage & Power Consumption: |
|
||||||||||
Optional Feature: | 90% Power saver series also available | ||||||||||
Other Specification Data: | Available on Request |
Coil Features: | High Reliability Unaffected by Voltage Surges.Easy coil changes coil lockable in 4X90 position or freely movable in between as require. |
---|---|
Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure. |
Note: | Use of filter in the inlet port is recommended. |
Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm² | Max. Operating Pressure Kg/cm² | Seal & Diaphragm Material | Flow Factor Kv m³ / hr |
---|---|---|---|---|---|---|---|
TAN14 | ALUMINUM | ¼” | 1.50 | 0 | 10 | NBR / SI / FKM /EPDM | 0.07 |
TBN14 | BRASS | ¼” | 1.50 | 0 | 10 | NBR / SI / FKM /EPDM | 0.07 |
TCN14 | CF8 / CF8M | ¼” | 1.50 | 0 | 10 | NBR / SI / FKM /EPDM | 0.07 |
TBN74 | BRASS | ???” | 1.50 | 0 | 10 | NBR / SI / FKM /EPDM | 0.07 |
TBN24 | BRASS | ½” | 1.50 | 0 | 10 | NBR / SI / FKM /EPDM | 0.07 |
TCN24 | CF8 / CF8M | ½” | 1.50 | 0 | 10 | NBR / SI / FKM /EPDM | 0.07 |
TBN040 | BRASS | ???” | 1.50 | 0 | 10 | NBR / SI / FKM /EPDM | 0.042 |
TBN140 | BRASS | ¼” | 1.50 | 0 | 10 | NBR / SI / FKM /EPDM | 0.042 |
TBN043 | BRASS | ???” | 1.50 | 0 | 7 | NBR / SI / FKM /EPDM | 0.042 |
Additional Information:
Product Details:
Minimum Order Quantity | 1000 Piece |
Model Name/Number | PCN |
Size | 1/2",3/4",1",1-1/4",1-1/2",2",2-1/2",3",4" |
Control Type | Solenoid Coil |
Brand | Uflow |
Material | SS-304,SS316 |
Pressure | 0-12 BAR |
Color | Silver |
Country of Origin | Made in India |
Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
End Connection: | Screwed / Flange | ||||||||||
Body Material: | SS ASTM A351 Grade CF8 / CF8M | ||||||||||
Diaphragm & Media Temp: |
| ||||||||||
Circumstance Temp: | -10° C to 70° C | ||||||||||
Media: | Air,Water,Chemical,Gas. | ||||||||||
Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment | ||||||||||
Operating Voltage & Power Consumption: |
| ||||||||||
Optional Feature: | 90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces. | ||||||||||
Other Specification Data: | Available on Request - High Pressure 20Kg Series. |
Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require. |
---|---|
Note: | Use of filter in the inlet port is recommended. |
Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm² | Max. Operating Pressure Kg/cm² | Seal & Diaphragm Material | Flow Factor Kv m³ / hr |
---|---|---|---|---|---|---|---|
PCN28 | CF8 / CF8M | ½” | 17 | 0.5 | 12 | NBR / EPDM / VITON | 03.20 |
PCN38 | CF8 / CF8M | ¾” | 20 | 0.5 | 12 | NBR / EPDM / VITON | 5 |
PCN48 | CF8 / CF8M | 1” | 25 | 0.5 | 12 | NBR / EPDM / VITON | 8.20 |
PCN58 | CF8 / CF8M | 1¼” | 36 | 0.5 | 12 | NBR / EPDM / VITON | 12.20 |
PCN68 | CF8 / CF8M | 1½” | 36 | 0.5 | 12 | NBR / EPDM / VITON | 17.10 |
PCN88 | CF8 / CF8M | 2” | 48 | 0.5 | 12 | NBR / EPDM / VITON | 29.90 |
PCN98 | CF8 / CF8M | 2½” | 60 | 0.5 | 12 | NBR / EPDM / VITON | 43.50 |
PCNA8 | CF8 / CF8M | 3” | 72 | 0.5 | 12 | NBR / EPDM / VITON | 64.50 |
Additional Information:
Product Details:
Minimum Order Quantity | 1000 Piece |
Model Name/Number | HCP |
Size | 1/2",3/4",1",1-1/4",1-1/2",2" |
Control Type | Solenoid Coil |
Brand | Uflow |
Material | SS-304,SS316 |
Pressure | 1.5-12 BAR,1.5-40 BAR |
Color | Silver |
Port Size | 1/2",3/4",1",1-1/4",1-1/2",2" |
Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
End Connection: | Screwed / Flange | ||||||||||
Body Material: | SS ASTM A351 Grade CF8 / CF8M | ||||||||||
Media Temp: | -10° C to 180° C | ||||||||||
Seal & ‘O’ Ring: | PTFE + Silicon / Viton | ||||||||||
Circumstance Temp: | -10° C to 70° C | ||||||||||
Media: | Steam, Hot Water, Hot Fluid, Water Oil | ||||||||||
Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
Operating Voltage & Power Consumption: |
| ||||||||||
Optional Feature: | 90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces. | ||||||||||
Other Specification Data: | Available on Request |
Coil Features: | High Reliability Unaffected by Voltage Surges.Easy coil changes coil lockable in 4X90 position or freely movable in between as require. |
---|---|
Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flame proof enclosure, IP-68 Weather proof enclosure. |
Note: | Use of filter in the inlet port is recommended. |
Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm² | Max. Operating Pressure Kg/cm² | Seal & Diaphragm Material | Flow Factor Kv m³ / hr |
---|---|---|---|---|---|---|---|
HCP29 | CF8 / CF8M | ½” | 17 | 1.5 | 12 | PTFE | 4 |
HCP39 | CF8 / CF8M | ¾” | 20 | 1.5 | 12 | PTFE | 7 |
HCP49 | CF8 / CF8M | 1” | 25 | 1.5 | 12 | PTFE | 12 |
HCP59 / HCP69 | CF8 / CF8M | 1¼” / 1½” | 36 | 1.5 | 12 | PTFE | 23 |
HCP89 | CF8 / CF8M | 2” | 48 | 1.5 | 12 | PTFE | 38 |
HCP2A | CF8 / CF8M | ½” | 17 | 1.5 | 40 | PTFE | 3.50 |
HCP3A | CF8 / CF8M | ¾” | 20 | 1.5 | 40 | PTFE | 3.30 |
HCP4A | CF8 / CF8M | 1” | 25 | 1.5 | 40 | PTFE | 8.30 |
HCP5A / HCP6A | CF8 / CF8M | 1¼” / 1½” | 36 | 1.5 | 40 | PTFE | 17 |
HCP8A | CF8 / CF8M | 2” | 48 | 1.5 | 40 | PTFE | 31 |
Additional Information: