Water Valve

Product Details:

Butterfly Valvevalve: Features

• Bi-directional zero leakage butterfly valve.
• ISO Pad for mounting, Gear Operator /Actuator
• Extremely small play between the stem and disc due to ‘Double D’ drive.
• Accurate dual stem sealing prevents leakage.
• Butterfly valve can be mounted between flanges as per ASME, BS-10.
• 100% tested under Water and Pneumatic.
• 360° disc rotation.
• Design Standard : ISO 5211, API 609, ASME B16.5 150#.
• Nominal Diameter : DN50 -DN250.
• Pressure Rang (bar) : PN10, PN16.
• ANSI B16.5 150#, BS10 TABLE E, TABLE F, TABLE H, Flange Accommodation.
• Face to Face Dimension : API 609 (CAT A).
• Operator mounting flange : As per ISO 5211.
• Operator : Hand Lever / Gear / Actuator.
• End connection : wafer end.
• Leakage Class : 100% tightness at full differential Pressure.

Additional Information:

• Production Capacity: 500
• Delivery Time: 2 Week

Product Details:

Digital Curtain Gang Solenoid valve 8 Station

No. of Station  :  8 Nos.

Body Material :  Brass

Pressure Range: 0-1.75 Bar

Nozzle Orifice Hole :  5 MM

Coil Width: 26 MM

Coil Bore: 10 MM

Inlet Connection : G1/2 Female

Nozzle Centre Distance : 14 MM

Total Length: 114MM

Product Details:

End Connection    : Flange end, Screwed end, socket Weld, Butt weld
Face To Face       : ASME B16.10 (Flange end) 
Pressure Class      : 150# 
Design Standard   : ASME b16.10, ASME B16.11, ASME B16.25, ASME                     B16.34, ASME B16.5, API 598, BS EN ISO                                      17292,ISO 5211

Product Details:

2/2 Way Direct Acting Valve (NC)valve: coil:

Additional Information:

• Production Capacity: 1000 / Per Week
• Delivery Time: 1 Week

Product Details:

3/2 Way Direct Acting Valve (NC)valve: coil: Technical Data

Additional Information:

• Production Capacity: 1000 / Per Week
• Delivery Time: 1 Week

Product Details:

Pilot Operated Diaphragm Type Solenoid Valve (NC)valve: coil: Technical Data

Additional Information:

• Production Capacity: 1000 / PER WEEK
• Delivery Time: 1 WEEK

Product Details:

Port :
End Connection :
Body Material :
Diaphragm :
Circumstance Temp :
Media Temp:
Media :
Main Features :


Operating Voltage :
Power Consumption :
Features :
Coil Housing :
Optional Feature :
Other Specification Data : 

Refer below technical data sheet (Available BSP / NPT)
Screwed.
Forged Brass. 
Nitrite (NBR),VITON (FKM),EPDM.
-10 °C to 90 °C
-10 °C to 90 °C, -10 °C to 140 °C, -10 °C to 180 °C.
Air, Water, Chemical, Gases, Oil, Diesel, Kerosene, LPG.
Internal Parts are superior corrosion resistance steel (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical applications & Highly corrosive environment. 
AC : 24V, 48V, 110V, 230V, 50HZ/60HZ     DC : 12V, 24V
AC : 5.5W, 7.5W, 8.5W, 9.5W, 10W, 11.5W, 12W     DC : 10W, 11W
High Reliability Unaffected by Voltage Surges.
Easy coil changes Coil lockable in 4Χ90, Position or freely movable in between as require.
Epoxy Square Coil, Metallic Round Enclosure, IP-67 Flame Proof Enclosure, IP-68 Weather Proof Enclosure.
90% Power saver series also available. Manual Override.
Water hammering reducer also available to avoid water hammer forces.
Available on request. 

Product Details:

Semi Lift Diaphragm Operated Solenoid Valve (NC/NO)valve: coil: Technical Data

Additional Information:

• Production Capacity: 1000/ PER WEEK
• Delivery Time: 1 WEEK

Product Details:

• 1) Convertible from Single Acting to Double Acting,
• 2) Multiple functions with the same operator - NC / NO / Bi-Directional,
• 3) Rotatable operator -360°,
• 4) NAMUR connection for easy to install Pilot Solenoid Valve ( Optional ),
• 5) Also available in non-NAMUR connection operator,
• 6) Transparent Dome for visual valve open indication,
• 7) Lubricated air not essential,
• 8) Flow direction below or above the seat,
• 9) Media:- Steam, Air, Water, Chemical, Gases, Oil, Diesel, Hot water,
• 10) Application:- Steam, autoclave and sterilizer, ink and paint dispensing, industrial compressor, bottling and dispensing equipment, textile dying and drying and pharmasuitical.

Product Details:

Valve

Port : 
Pipe :
End Connection :
Body & Sleeve :
Seat :
Shaft :
Fluid Temp :
Ambient Temp :

Actuator Type

Actuator Cover :
Seal :
Actuator Working
Pressure : 
Life :
Other Technical
Data :

BSP/NPT
1/2" to 2"
Screwed / Flanged End / Tri-Clamp.
SS ASTM A351 Grade CF8 / CF8M 
PTFE/ PEEK.
SS 304 / SS 316
-10 °C to 180 °C 
-10 °C to 60 °C



Nylon Glass-filed (Corrosion resistive )
NBR VITON

3.5 to 8 bar(Air)
Three Million Cycle Tested

Available on Request

Product Details:

valve: coil: Technical Data

Additional Information:

• Production Capacity: 1000 / PER WEEK
• Delivery Time: 1 WEEK

Product Details:

Port Size :
End Connection :
Body Material :
Diaphragm :
Circumstance Temp :
Media Temp:
Media :
Main Features :


Operating Voltage :
Power Consumption :
Features :


Coil Housing :

Optional Features :

Other Specification Data :

Refer below technical data sheet (Available BSP / NPT)

Screwed / Flange
SS ASTM A351 Grade CF8 / CF8M
Nitrite (NBR), Optional VITON (FKM),EPDM
-10 °C to 90 °C
-10 °C to 90 °C, -10 °C to 140 °C, -10 °C to 180 °C
Air ,Water , Chemical, Gases, Oil, Diesel, Kerosene, LPG.
Internal Parts are superior corrosion resistance steel (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical applications & Highly corrosive environment. 
AC : 24V, 48V, 110V, 230V, 50Hz/60 Hz     DC : 12V, 24V
AC : 5.5W, 7.5W, 8.5W, 9.5W, 10W, 11.5W, 12W     DC : 10W, 11W
High Reliability Unaffected by Voltage Surges. 
Easy coil changes Coil lockable in 4Χ90, Position or freely movable in between as require.
Epoxy Square Coil, Metallic Round Enclosure, IP-67 Flame Proof Enclosure, IP-68 Weather Proof Enclosure.
90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces
Available on Request.