Angle Seat Valves

Product Details:

Angle seat valves are 2/2 way pneumatically actuated piston valves. The piston actuator provides a linear motion to lift the seal off its seat. Because the seat is positioned under an angle, the flow is minimally impeded in the open position, resulting in an excellent flow rate and a low pressure loss. They are used to regulate the flow of liquids, gases, steam, vacuum and even aggressive fluids. They can also operate with high temperatures and high viscosity media, even under zero differential pressures. The robust design makes angle seat valves a popular choice for harsh applications and they have very high cycle lives. Therefore, they are excellent long-life alternatives to ball valves. These valves are also suitable alternatives for solenoid valves, especially with contaminated, viscous media where typical solenoid valves would fail. They may be operated using a single acting or double acting configuration, which has an influence on its pressure rating.

Additional Information:

• Item Code: YMP
• Production Capacity: 20000 Per Month
• Delivery Time: Ex-stock
• Packaging Details: Genuine Packing

Product Details:

Angle Seat Valve with Plastic Operator (NC/NO/Bi-Directional)valve: coil: Features

• Convertible from single Acting to Double Acting.
• Multiple Function with the same operator - NC / NO / Bi-Directional.
• Flow direction below or above the seat.
• Also available in non-Namur connection operator.
• Transparent dome for visual valve open indication.
• Lubricated air is not essential.
• Rotatable Operator - 360°.
• Media : Steam, Air, Water, Chemical, Gases,Oil, Diesel, Hot Water.
• Namur connection for easy to install PilotSolenoid Valve (Optional).
• Application: Steam, Autoclave and Sterilizer,Ink and Paint dispensing, Industrial compressor bottling and dispensing equipment, textile dying and drying and pharmaceutical.

Technical Data

Additional Information:

• Production Capacity: 2000 / Per Week
• Delivery Time: 1 Week

Product Details:

Angle Seat Valve with Plastic Operator (NC/NO/Bi-Directional)valve: coil: Features

• Convertible from single Acting to Double Acting.
• Multiple Function with the same operator - NC / NO / Bi-Directional.
• Flow direction below or above the seat.
• Also available in non-Namur connection operator.
• Transparent dome for visual valve open indication.
• Lubricated air is not essential.
• Rotatable Operator - 360°.
• Media : Steam, Air, Water, Chemical, Gases,Oil, Diesel, Hot Water.
• Namur connection for easy to install PilotSolenoid Valve (Optional).
• Application: Steam, Autoclave and Sterilizer,Ink and Paint dispensing, Industrial compressor bottling and dispensing equipment, textile dying and drying and pharmaceutical.

Technical Data

Additional Information:

• Production Capacity: 2000 /Per Week
• Delivery Time: 1 Week

Product Details:

Angle Seat Valve with Steel Operator (NC/NO)valve: coil: Technical Data

Additional Information:

• Production Capacity: 2000 / Per Week
• Delivery Time: 1 Week

Product Details:

We are the leading Y Type Pneumatic Valvemanufacturer of India with the Brand name "UFLOW". These are ideal for suited application as they are made as per the industry standards employing the state-of-the-art technology and supreme quality raw material.To make certain that our products are excellent in quality, these valves are meticulously tested on diverse parameters by our Q.C department.Hence these are known for reliable & smooth performance, sturdy construction and excellent output.These are accessible in different standard sizes and we also customize them to fulfill the application requirements of our customers. We offer Y Type Pneumatic Valve at splendid rates.

Salient Features :

• Easy to install
• Corrosion resistant
• Accurately designed
• Reliable
• Smooth performance
• Sturdy construction
• Excellent output

Specifications :

• 2/2 Way Angle Seat Controls Valves
• Type: Normally Close/open
• Size Range - 15mm to 50mm (1/2" To 2")
• Body: CF8/CF8M
• Air Pressure: 3.5 To 7 Bar
• Working Press: Up to 16bar
• Working Temp: up to 180 C
• Ends Screwed/flanged/triclover
• Media: Air, water, oil, gas & Steam

Additional Information:

• Item Code: YCP
• Production Capacity: 10000 per month
• Delivery Time: ex stock

Product Details:

We are the leading Y Type Pneumatic Valve manufacturer of India. These are ideal for suited application as they are made as per the industry standards employing the state-of-the-art technology and supreme quality raw material.To make certain that our products are excellent in quality, these valves are meticulously tested on diverse parameters by our Q.C department.Hence these are known for reliable & smooth performance, sturdy construction and excellent output.These are accessible in different standard sizes and we also customize them to fulfill the application requirements of our customers. We offer Y Type Pneumatic Valve at splendid rates.

Salient Features :

• Easy to install
• Corrosion resistant
• Accurately designed
• Reliable
• Smooth performance
• Sturdy construction
• Excellent output

Specifications :

• 2/2 Way Angle Seat Controls Valves
• Type: Normally Close/open
• Size Range - 15mm to 50 mm (1/2' To 2')
• End Connection : Screwed / Flanged / Triclover
• Media: Air, water, oil, gas & Steam

Additional Information:

• Item Code: YCP-SERIES
• Port of Dispatch: MUMBAI
• Production Capacity: 50000
• Delivery Time: ex stock

Product Details:

• 1) Convertible from Single Acting to Double Acting,
• 2) Multiple functions with the same operator - NC / NO / Bi-Directional,
• 3) Rotatable operator -360°,
• 4) NAMUR connection for easy to install Pilot Solenoid Valve ( Optional ),
• 5) Also available in non-NAMUR connection operator,
• 6) Transparent Dome for visual valve open indication,
• 7) Lubricated air not essential,
• 8) Flow direction below or above the seat,
• 9) Media:- Steam, Air, Water, Chemical, Gases, Oil, Diesel, Hot water,
• 10) Application:- Steam, autoclave and sterilizer, ink and paint dispensing, industrial compressor, bottling and dispensing equipment, textile dying and drying and pharmasuitical.

Additional Information:

• Item Code: ACP25

Product Details:

UFLOW MAKE: -

Product Details:

UFLOW MAKE:-

Additional Information:

• Item Code: YCP35
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: Ex-Stock

Product Details:

UFLOW MAKE:-

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: Ex-Stock

Product Details:

Valve

Port : 
Pipe :
End Connection :
Body & Sleeve :
Seat :
Shaft :
Fluid Temp :
Ambient Temp :

Actuator Type

Actuator Cover :
Seal :
Actuator Working
Pressure : 
Life :
Other Technical
Data :

BSP/NPT
1/2" to 2"
Screwed / Flanged End / Tri-Clamp.
SS ASTM A351 Grade CF8 / CF8M 
PTFE/ PEEK.
SS 304 / SS 316
-10 °C to 180 °C 
-10 °C to 60 °C



Nylon Glass-filed (Corrosion resistive )
NBR VITON

3.5 to 8 bar(Air)
Three Million Cycle Tested

Available on Request

Product Details:

UFLOW MAKE:-

We are leading manufacture and supplier of Angle Type Control Valve to our revered client, these are manufactured using by high class of material keeping in mind requirements of our client. Pneumatic Angle Type Control Valve offered by us are available at market leading price.

Features:

• Cost effective
• Long life
• High quality

Additional Information:

• Item Code: YCP65
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai

Product Details:

UFLOW MAKE:-
Backed by rich experience in this domain, we are engaged in offering Pneumatic Angle Type Control Valve to our clients. This Pneumatic Angle Type Control Valve is made utilizing high grade raw material and innovative technology in strict adherence with the international quality norms and standards. Pneumatic Angle Type Control Valve offered by us are available industry competitive price.

Specification:

Additional Information:

• Item Code: YCP83
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: Ex-Stock

Product Details:

Port :
End Connection :
Body Material :
Diaphragm :
Circumstance Temp :
Media Temp :
Media :
Main Features :

Operating Voltage :
Power Consumption :
Features :


Coil Housing :

Optional Feature :
Other Specification Data :

Refer below technical data sheet (Available BSP)
Screwed.
Aluminium Die Cast
Nitrile(NBR)
-10 °C to 90 °C
-10 °C to 90 °C
Air
Internal Parts in Superior corrosion resistance steel (Equivalent to SS316L) Suitable for Air Pollution Control System, Bag Filter Machine.
AC : 24V, 48V, 110V, 230V, 240V, 50HZ/60HZ DC : 12V, 24V.
AC : 5.5W, 7.5W, 8.5W, 9.5W, 10W, 11.5W, 12W DC : 10V, 11V.
High Reliability Unaffected by Voltage Surges.
Easy Coil changes Coil lockable in 4X90 position or freely movable in between as require.
Epoxy Square Coil, Metallic Round Enclosure, IP-67 Flame Proof Enclosure, IP-68 Weather Proof Enclosure.
90% Power saver series also available.
Available on request.