Uflow Automation
Veraval, Rajkot, Gujarat
GST No. 24AADFU2793B1ZD
TrustSEAL Verified
Call 0804860002978% Response Rate
SEND EMAIL
Product Details:
| Model Name/Number | MMN33N-FLP |
| Brand | Uflow |
| Valve Size | 3/4" NPT |
| Material | Stainless Steel |
| Pressure | 7 Bar |
| Media | Water |
| Usage/Application | Industrial |
Refer below technical data sheet (Available BSP / NPT)
End Connection:Screwed / Flange
Body Material:SS ASTM A351 Grade CF8 / CF8M, Forged Brass
Media Temp & seal o ring:-30° C to 90° C, -10° C to 140° C, -10° C to 180° C , -10° C to 180° C
Diapharagm:Nitrile (NBR), EPDM, Viton (FKM), PTFE
Circumstance Temp:-10° C to 70° C
Media:Air, Water, Chemical, Gas, Oil, Steam, LPG.
Main Features:Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment.
Operating Voltage & Power Consumption:24AC, 110AC, 230AC, 12DC, 24DC
Power Consumption:7W, 8W, 8W / 17W, 10W, 11W
Optional Feature:90% Power saver series also available, Water hammering reducer also available to avoid water hammer forces. Special high flow rate series available on request at low pressure or gravity pressure application.
Other Specification Data:Available on Request.
Coil InformationCoil Features:High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require.
Coil Housing:Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure.
Product Details:
| Minimum Order Quantity | 1000 Piece |
| Brand | Uflow |
| Material | Brass |
| Valve Size | 1/2" |
| Model Name/Number | PBN |
| Flow Factor | 17.10 |
| Port Type | BSP and NPT |
| Series | UMD |
| Country of Origin | Made in India |
| Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Connection: | Screwed / Flange | ||||||||||
| Body Material: | SS ASTM A351 Grade CF8 / CF8M, Forged Brass | ||||||||||
| Diaphragm & Media Temp: |
| ||||||||||
| Circumstance Temp: | -10° C to 70° C | ||||||||||
| Media: | Steam, Hot Water, Hot Fluid, Water Oil | ||||||||||
| Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
| Operating Voltage & Power Consumption: |
| ||||||||||
| Optional Feature: | 90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces. | ||||||||||
| Other Specification Data: | Available on Request |
| Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position or freely movable in between as require. |
|---|---|
| Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure |
| Note: | Use of filter in the inlet port is recommended. |
| Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm² | Max. Operating Pressure Kg/cm² | Seal & Diaphragm Material | Flow Factor Kv m³ / hr |
|---|---|---|---|---|---|---|---|
| PBN260 | Brass | ½" | 12 | 0.30 | 10 | NBR / EPDM / VITON | 2.10 |
| PBN360 | Brass | ¾" | 20 | 0.30 | 10 | NBR / EPDM / VITON | 5.50 |
| PBN460 | Brass | 1" | 25 | 0.30 | 10 | NBR / EPDM / VITON | 9 |
| PBN660 | Brass | 1½" | 36 | 0.30 | 10 | NBR / EPDM / VITON | 17.10 |
Product Details:
| Minimum Order Quantity | 1000 Piece |
| Usage/Application | Industrial |
| Pressure | Medium Pressure |
| Valve Size | 3/8" |
| Model Name/Number | MCN |
| Brand | Uflow |
| Material | Stainless Steel |
| Connection Type | Screwed / Flange End |
| Media Type | Gas |
| Country of Origin | Made in India |
| Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Connection: | Screwed / Flange | ||||||||||
| Body Material: | SS ASTM A351 Grade CF8 / CF8M, Forged Brass | ||||||||||
| Diaphragm & Media Temp: |
|
||||||||||
| Circumstance Temp: | -10?? C to 70?? C | ||||||||||
| Media: | Air, Water, Chemical, Gas, Oil, Steam, LPG. | ||||||||||
| Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
| Operating Voltage & Power Consumption: |
|
||||||||||
| Optional Feature: | 90% Power saver series also available, Water hammering reducer also available to avoid water hammer forces. Special high flow rate series available on request at low pressure or gravity pressure application. | ||||||||||
| Other Specification Data: | Available on Request. |
| Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require. |
|---|---|
| Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure. |
| Note: | Use of filter in the inlet port is recommended. Preferably Over Horizontal Pipeline with the coil upright. |
| Caution: | AC coil should not be used on a DC coil valve and vice versa. For DC coil max operating pressure may reduce by 1 Kg/cm2 |
Product Details:
| Minimum Order Quantity | 1000 Piece |
| Usage/Application | Air |
| Valve Size | 3/8" |
| Model Name/Number | MCN |
| Brand | Uflow |
| Material | Stainless Steel |
| Connection Type | Screwed / Flange End |
| Material Grade | SS316 |
| Voltage | 230V |
| Country of Origin | Made in India |
| Power Consumption | 9W |
| Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Connection: | Screwed / Flange | ||||||||||
| Body Material: | SS ASTM A351 Grade CF8 / CF8M, Forged Brass | ||||||||||
| Diaphragm & Media Temp: |
|
||||||||||
| Circumstance Temp: | -10?? C to 70?? C | ||||||||||
| Media: | Air, Water, Chemical, Gas, Oil, Steam, LPG. | ||||||||||
| Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
| Operating Voltage & Power Consumption: |
|
||||||||||
| Optional Feature: | 90% Power saver series also available, Water hammering reducer also available to avoid water hammer forces. Special high flow rate series available on request at low pressure or gravity pressure application. | ||||||||||
| Other Specification Data: | Available on Request. |
| Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require. |
|---|---|
| Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure. |
| Note: | Use of filter in the inlet port is recommended. Preferably Over Horizontal Pipeline with the coil upright. |
| Caution: | AC coil should not be used on a DC coil valve and vice versa. For DC coil max operating pressure may reduce by 1 Kg/cm2 |
Product Details:
| Minimum Order Quantity | 1000 Piece |
| Brand | Uflow |
| Media | Gas |
| Material | Brass |
| Valve Size | 1-1/2" |
| Model Name/Number | PBN |
| Coil Voltage | 24V |
| Frequency | 50 Hz |
| Flow Factor | 17.10 |
| Port Type | BSP |
| Series | UMD |
| Country of Origin | Made in India |
| Wattage | 6W |
| Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Connection: | Screwed / Flange | ||||||||||
| Body Material: | SS ASTM A351 Grade CF8 / CF8M, Forged Brass | ||||||||||
| Diaphragm & Media Temp: |
|
||||||||||
| Circumstance Temp: | -10?? C to 70?? C | ||||||||||
| Media: | Steam, Hot Water, Hot Fluid, Water Oil | ||||||||||
| Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
| Operating Voltage & Power Consumption: |
|
||||||||||
| Optional Feature: | 90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces. | ||||||||||
| Other Specification Data: | Available on Request |
| Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position or freely movable in between as require. |
|---|---|
| Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure |
| Note: | Use of filter in the inlet port is recommended. |
| Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm?? | Max. Operating Pressure Kg/cm?? | Seal & Diaphragm Material | Flow Factor Kv m?? / hr |
|---|---|---|---|---|---|---|---|
| PBN260 | Brass | ??" | 12 | 0.30 | 10 | NBR / EPDM / VITON | 2.10 |
| PBN360 | Brass | ??" | 20 | 0.30 | 10 | NBR / EPDM / VITON | 5.50 |
| PBN460 | Brass | 1" | 25 | 0.30 | 10 | NBR / EPDM / VITON | 9 |
| PBN660 | Brass | 1??" | 36 | 0.30 | 10 | NBR / EPDM / VITON | 17.10 |
Product Details:
| Minimum Order Quantity | 1000 Piece |
| Usage/Application | Water |
| Pressure | Medium Pressure |
| Valve Size | 3/8" |
| Model Name/Number | MBN |
| Brand | Uflow |
| Material | Brass |
| Connection Type | Screwed |
| Country of Origin | Made in India |
| Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Connection: | Screwed / Flange | ||||||||||
| Body Material: | SS ASTM A351 Grade CF8 / CF8M, Forged Brass | ||||||||||
| Diaphragm & Media Temp: |
|
||||||||||
| Circumstance Temp: | -10?? C to 70?? C | ||||||||||
| Media: | Air, Water, Chemical, Gas, Oil, Steam, LPG. | ||||||||||
| Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
| Operating Voltage & Power Consumption: |
|
||||||||||
| Optional Feature: | 90% Power saver series also available, Water hammering reducer also available to avoid water hammer forces. Special high flow rate series available on request at low pressure or gravity pressure application. | ||||||||||
| Other Specification Data: | Available on Request. |
| Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require. |
|---|---|
| Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure. |
| Note: | Use of filter in the inlet port is recommended. Preferably Over Horizontal Pipeline with the coil upright. |
| Caution: | AC coil should not be used on a DC coil valve and vice versa. For DC coil max operating pressure may reduce by 1 Kg/cm2 |
Product Details:
| Minimum Order Quantity | 1000 Piece |
| Usage/Application | Industrial |
| Valve Size | 3/8" |
| Model Name/Number | MCN |
| Brand | Uflow |
| Material | Stainless Steel |
| Connection Type | Flanges |
| Country of Origin | Made in India |
| Power Consumption | 11W |
| Operating Voltage | 220V |
| Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Connection: | Screwed / Flange | ||||||||||
| Body Material: | SS ASTM A351 Grade CF8 / CF8M, Forged Brass | ||||||||||
| Diaphragm & Media Temp: |
|
||||||||||
| Circumstance Temp: | -10° C to 70° C | ||||||||||
| Media: | Air, Water, Chemical, Gas, Oil, Steam, LPG. | ||||||||||
| Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
| Operating Voltage & Power Consumption: |
|
||||||||||
| Optional Feature: | 90% Power saver series also available, Water hammering reducer also available to avoid water hammer forces. Special high flow rate series available on request at low pressure or gravity pressure application. | ||||||||||
| Other Specification Data: | Available on Request. |
| Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require. |
|---|---|
| Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure. |
| Note: | Use of filter in the inlet port is recommended. Preferably Over Horizontal Pipeline with the coil upright. |
| Caution: | AC coil should not be used on a DC coil valve and vice versa. For DC coil max operating pressure may reduce by 1 Kg/cm2 |
Product Details:
| Minimum Order Quantity | 1000 Piece |
| Usage/Application | Industrial |
| Valve Size | 3/4" |
| Brand | Uflow |
| Material | Stainless Steel |
| Connection Type | Screwed and Flange End |
| Media Type | Gas |
| Coil Voltage | 24V |
| Material Grade | SS304 |
| Country of Origin | Made in India |
| Power Consumption | 11W |
| Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Connection: | Screwed / Flange | ||||||||||
| Body Material: | SS ASTM A351 Grade CF8 / CF8M, Forged Brass | ||||||||||
| Diaphragm & Media Temp: |
|
||||||||||
| Circumstance Temp: | -10° C to 70° C | ||||||||||
| Media: | Air, Water, Chemical, Gas, Oil, Steam, LPG. | ||||||||||
| Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
| Operating Voltage & Power Consumption: |
|
||||||||||
| Optional Feature: | 90% Power saver series also available, Water hammering reducer also available to avoid water hammer forces. Special high flow rate series available on request at low pressure or gravity pressure application. | ||||||||||
| Other Specification Data: | Available on Request. |
| Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require. |
|---|---|
| Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure. |
| Note: | Use of filter in the inlet port is recommended. Preferably Over Horizontal Pipeline with the coil upright. |
| Caution: | AC coil should not be used on a DC coil valve and vice versa. For DC coil max operating pressure may reduce by 1 Kg/cm2 |
Product Details:
| Minimum Order Quantity | 1000 Piece |
| Brand | Uflow |
| Media | Gas |
| Material | Brass |
| Valve Size | 1/2" |
| Model Name/Number | PBN |
| Flow Factor | 2.10 |
| Port Type | BSP |
| Series | UMD |
| Country of Origin | Made in India |
| Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Connection: | Screwed / Flange | ||||||||||
| Body Material: | SS ASTM A351 Grade CF8 / CF8M, Forged Brass | ||||||||||
| Diaphragm & Media Temp: |
| ||||||||||
| Circumstance Temp: | -10?? C to 70?? C | ||||||||||
| Media: | Steam, Hot Water, Hot Fluid, Water Oil | ||||||||||
| Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
| Operating Voltage & Power Consumption: |
| ||||||||||
| Optional Feature: | 90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces. | ||||||||||
| Other Specification Data: | Available on Request |
| Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position or freely movable in between as require. |
|---|---|
| Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure |
| Note: | Use of filter in the inlet port is recommended. |
| Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm?? | Max. Operating Pressure Kg/cm?? | Seal & Diaphragm Material | Flow Factor Kv m?? / hr |
|---|---|---|---|---|---|---|---|
| PBN260 | Brass | ??" | 12 | 0.30 | 10 | NBR / EPDM / VITON | 2.10 |
| PBN360 | Brass | ??" | 20 | 0.30 | 10 | NBR / EPDM / VITON | 5.50 |
| PBN460 | Brass | 1" | 25 | 0.30 | 10 | NBR / EPDM / VITON | 9 |
| PBN660 | Brass | 1??" | 36 | 0.30 | 10 | NBR / EPDM / VITON | 17.10 |
Product Details:
| Minimum Order Quantity | 1000 Piece |
| Usage/Application | Air |
| Pressure | Medium Pressure |
| Valve Size | 3/8" |
| Model Name/Number | MCN |
| Brand | Uflow |
| Material | Stainless Steel |
| Connection Type | Screwed |
| Material Grade | SS-304 |
| Voltage | 230V |
| Country of Origin | Made in India |
| Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Connection: | Screwed / Flange | ||||||||||
| Body Material: | SS ASTM A351 Grade CF8 / CF8M, Forged Brass | ||||||||||
| Diaphragm & Media Temp: |
|
||||||||||
| Circumstance Temp: | -10° C to 70° C | ||||||||||
| Media: | Air, Water, Chemical, Gas, Oil, Steam, LPG. | ||||||||||
| Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
| Operating Voltage & Power Consumption: |
|
||||||||||
| Optional Feature: | 90% Power saver series also available, Water hammering reducer also available to avoid water hammer forces. Special high flow rate series available on request at low pressure or gravity pressure application. | ||||||||||
| Other Specification Data: | Available on Request. |
| Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require. |
|---|---|
| Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure. |
| Note: | Use of filter in the inlet port is recommended. Preferably Over Horizontal Pipeline with the coil upright. |
| Caution: | AC coil should not be used on a DC coil valve and vice versa. For DC coil max operating pressure may reduce by 1 Kg/cm2 |
Product Details:
| Minimum Order Quantity | 1000 Piece |
| Model Name/Number | PCN |
| Control Type | Solenoid Coil |
| Brand | Uflow |
| Material | Stainless Steel |
| Pressure | 12 Bar |
| Color | Silver |
| Port Size | 4" |
| Country of Origin | Made in India |
| Material Grade | SS316 |
| Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Connection: | Screwed / Flange | ||||||||||
| Body Material: | SS ASTM A351 Grade CF8 / CF8M | ||||||||||
| Diaphragm & Media Temp: |
|
||||||||||
| Circumstance Temp: | -10° C to 70° C | ||||||||||
| Media: | Air,Water,Chemical,Gas. | ||||||||||
| Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment | ||||||||||
| Operating Voltage & Power Consumption: |
|
||||||||||
| Optional Feature: | 90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces. | ||||||||||
| Other Specification Data: | Available on Request - High Pressure 20Kg Series. |
| Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require. |
|---|---|
| Note: | Use of filter in the inlet port is recommended. |
| Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm² | Max. Operating Pressure Kg/cm² | Seal & Diaphragm Material | Flow Factor Kv m³ / hr |
|---|---|---|---|---|---|---|---|
| PCN28 | CF8 / CF8M | ½” | 17 | 0.5 | 12 | NBR / EPDM / VITON | 03.20 |
| PCN38 | CF8 / CF8M | ¾” | 20 | 0.5 | 12 | NBR / EPDM / VITON | 5 |
| PCN48 | CF8 / CF8M | 1” | 25 | 0.5 | 12 | NBR / EPDM / VITON | 8.20 |
| PCN58 | CF8 / CF8M | 1¼” | 36 | 0.5 | 12 | NBR / EPDM / VITON | 12.20 |
| PCN68 | CF8 / CF8M | 1½” | 36 | 0.5 | 12 | NBR / EPDM / VITON | 17.10 |
| PCN88 | CF8 / CF8M | 2” | 48 | 0.5 | 12 | NBR / EPDM / VITON | 29.90 |
| PCN98 | CF8 / CF8M | 2½” | 60 | 0.5 | 12 | NBR / EPDM / VITON | 43.50 |
| PCNA8 | CF8 / CF8M | 3” | 72 | 0.5 | 12 | NBR / EPDM / VITON | 64.50 |
Product Details:
| Minimum Order Quantity | 1000 Piece |
| Usage/Application | Air |
| Pressure | Medium Pressure |
| Valve Size | 1" |
| Model Name/Number | MCN |
| Brand | Uflow |
| Material | Stainless Steel |
| Connection Type | Screwed / Flange End |
| Material Grade | SS-304 |
| Voltage | 230V |
| Country of Origin | Made in India |
| Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Connection: | Screwed / Flange | ||||||||||
| Body Material: | SS ASTM A351 Grade CF8 / CF8M, Forged Brass | ||||||||||
| Diaphragm & Media Temp: |
|
||||||||||
| Circumstance Temp: | -10° C to 70° C | ||||||||||
| Media: | Air, Water, Chemical, Gas, Oil, Steam, LPG. | ||||||||||
| Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
| Operating Voltage & Power Consumption: |
|
||||||||||
| Optional Feature: | 90% Power saver series also available, Water hammering reducer also available to avoid water hammer forces. Special high flow rate series available on request at low pressure or gravity pressure application. | ||||||||||
| Other Specification Data: | Available on Request. |
| Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require. |
|---|---|
| Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure. |
| Note: | Use of filter in the inlet port is recommended. Preferably Over Horizontal Pipeline with the coil upright. |
| Caution: | AC coil should not be used on a DC coil valve and vice versa. For DC coil max operating pressure may reduce by 1 Kg/cm2 |
Product Details:
| Minimum Order Quantity | 1000 Piece |
| Usage/Application | Air |
| Model Name/Number | MBN |
| Brand | Uflow |
| Material | Brass |
| Connection Type | Flange End |
| Port Size | 2 Inches |
| Voltage | 230V |
| Country of Origin | Made in India |
| Wattage | 9W |
| Coil Code | FAI09H |
| Batch Number | 261710 |
| Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Connection: | Screwed / Flange | ||||||||||
| Body Material: | SS ASTM A351 Grade CF8 / CF8M, Forged Brass | ||||||||||
| Diaphragm & Media Temp: |
|
||||||||||
| Circumstance Temp: | -10° C to 70° C | ||||||||||
| Media: | Air, Water, Chemical, Gas, Oil, Steam, LPG. | ||||||||||
| Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
| Operating Voltage & Power Consumption: |
|
||||||||||
| Optional Feature: | 90% Power saver series also available, Water hammering reducer also available to avoid water hammer forces. Special high flow rate series available on request at low pressure or gravity pressure application. | ||||||||||
| Other Specification Data: | Available on Request. |
| Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require. |
|---|---|
| Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure. |
| Note: | Use of filter in the inlet port is recommended. Preferably Over Horizontal Pipeline with the coil upright. |
| Caution: | AC coil should not be used on a DC coil valve and vice versa. For DC coil max operating pressure may reduce by 1 Kg/cm2 |
4.4/5
Reviewed by 55 Users
Most Relevant Reviews